UV CLEAR TOPCOATED PREFINISH HARDWOOD PLYWOOD

 

WE CAN NOW PRE-FINISH ANY PLYWOOD ONE SIDE OR TWO SIDES AS PER MARKET STANDARDS OR AS PER CUSTOMERS REQUIREMENTS.

For kitchen cabinets, bathroom vanity interiors, shelving, store fixtures, drawer sides and     bottoms; Horizon Products International Inc. offers an advanced UV cured, permanent topcoat over high quality hardwood plywood to meet and exceed the ANSI/KCMA A161.1-1990, Sections 9.1, 9.2 and 9.3 performance standards for shrinkage and heat resistance as well as hot and cold check resistance and chemical resistance. 

The product features a factory applied clear topcoat produced through a flat-line finishing process. The process uses a laser precision rollcoater to apply four sealer basecoats and an ultraviolet cured topcoat consisting of an acrylate that is almost 100% solids resulting in an ideal and beautiful product. 

In addition to saving you time and money, buying hardwood plywood finished with a UV topcoat, helps to reduce emissions which are regulated in many states. Equally important, the UV topcoat is more durable than catalyzed topcoats and offers high gloss with low shrinkage.  

Ultraviolet cured finishes are practically a must for kitchen cabinets to meet Kitchen Cabinet Manufacturers Association (KCMA) finish guidelines for chemical and water resistance. These coatings also provide good resistance to the chemicals found in the kitchen, such as the acids found in vinegar, mustard, ketchup, and fingerprints. All this makes our UV topcoated hardwood plywood extremely durable and long-lasting. 

Properties

Values

Dry Finish Thickness

0.5-1.0 MIL

Amount Solids Applied

100%

VOC Emissions

Not found

Formaldehyde content

0%

Solvent and/or Water Effect

No Effect

Acetone Clean-Up permitted

Yes

Merchantability

Excellent

  

Features

Benefits

UV clear finish on one or two sides

No on-site spray finishing and drying

Excellent panel construction

Strong and stable end-use product

Broad selection of sizes, thicknesses, species, cores and grades

Manufacturing flexibility,

Economical

increased end-use opportunities

Excellent machinability

Most cost-effective panel for your money

Meets ANSI and HPVA quality standards

Environmental friendly product

 

UV coating Technical Data Sheet. (click here for pdf file)

 


 

Horizon Plywood.